HDG Lambda-Control 1 plus - Aggregates Wood Boiler

25
4.1.3 Aggregates Wood Boiler
Selection
Wood Boiler
Wood Boiler
…
Information
Information
Settings
Operating data
Chimney sweep
Operations counter
Calibrate O
2
*
Aggregates
Aggregates
Aggregate test*
Commissioning
V1 set ---.-%
Last error
V1** --.-%
Last note
V2 set ---.-%
Delete values
V2** ---.-%
Flue gas fan Level 2
Load pump ON
Return valve ---.-%
Load valve ---.-%
◄ Call up Selection menu
▲▼ Select Wood Boiler
◄ Confirm selection
► Leave menu
▲▼ Select Information
◄ Confirm selection
► Leave menu
▲▼ Select Aggregates
◄ Confirm selection
► Leave menu
▲▼ Browse menu
► Leave menu
*only displayed in operating status “Boiler OFF“ **display depends on boiler type
V1 set ---.-%
Air flap position V1-primary actuator.
V1 ---.-%
**
)
V1-primary actuator positioning feedback.
V2 set ---.-%
Air flap position V2-secondary actuator.
V2 ---.-%
**
)
V2-secondary actuator positioning feedback.
Flue gas fan Level 2
Possible settings: “Level 2” / **
)
“Level 1” / “Pause” / “OFF”.
Note: Level 2, high speed / level 1, reduced speed / pause, if switched from high to reduced speed.
Load pump ON
Possible settingss: “ON” / “OFF”.
Load pump M1 (transport pump – accumulator load pump)
Return valve ---.-%
Return valve position Y1.
Load valve ---.-%
Load valve position Y2.
**) display depends on boiler type