1. Introduction
Dear customer, Dear heating technician,
The controller Lambda-Control 1
plus
is the result of many years of research and resultant knowledge of Logotherm. It contains the
latest innovations in combustion and system technology and offers the highest level of quality and perfection.
Numerous of Lambda-Control 1
plus
´s automatic functions are unique new developments by our company. This system fundamentally
operates by automatically “learning” and “gathering” pertinent characteristics of your heating system and its operating methods.
This information is then used to calculate the optimal settings resulting in the highest level of comfort and efficiency, an
extraordinary eco-friendliness and last but not least in a significant reduction of energy costs.
Alongside with other functions, the fuel consumption calculation (BSB) when firing or refuelling the system and the combustion and
burnout optimisation (AAO) are the most significant developments.
1.0 Abbreviations and technical terms
AAO Combustion and Burnout Optimisation
ABO Combustion Demand Optimisation
Acc. t.-F4 Temperature at the sensor F4 in accumulator 1
AF. Anti-freeze
AFO Fire Optimisation
BSB Fuel Calculation
F Sensor
K Kelvin (a difference of 10K corresponds to a change of 10°C)
KLA Reduced Boiler Output
KV-KR Boiler flow – Boiler return
kW Kilowatt (power)
kWh Kilowatt/hr. (energy)
Legionella Pathogen, proliferate especially in temperatures from 25°C to 50°C
O
2
-sensor Oxygen Sensor
PAE Accumulator Run-up Easing
PK Boiler Output
PK
N
Boiler Rated Output
RSA Rapid System Heating
RWO Residual Heat Optimisation
SLA Peak Load Coverage
STB Safety Temperature Limiter
System Entire Heating System
TAD Flue gas Temperature Difference = Flue gas temp. - boiler temp.
TAG Flue gas Temperature
TA Outside Temperature
TR Return Temperature
TV Flow Temperature
V1 Primary Combustion air
V2 Secondary Combustion air
Y1 Return valve
Y2 Load valve
≤ smaller than or the same as
≥ greater than or the same as
< smaller than
> greater than
λ Lambda (air ratio)