18 Establishing the electrical connection
To establish an electrical connection between the controller and the plug board, please use the prefabricated, provided
cable harness. The cable harness consists out of 4 single cables with plugs for the controller and the plug board.
Please note the different pole numbers and connect the cable plugs with the controller and the plug board according to
the connecting.
Plug in the cable plug correctly. The locking mechanism of the plugs must engage.
Now fix the plugged in cables wire ties to the plug board, as well as all plug board outgoing cables. The cables are to be
fixed in the recesses provided (see image below).
To Next Page
Loading...