EasyManua.ls Logo

HDG Lambda-Control 1 plus - Operation Mode; Settings

HDG Lambda-Control 1 plus
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
8.1.1 Operation mode
Selection
Pellet/Oil/Gas
Pellet/Oil/Gas
Operation mode
Operation mode
Settings
20.01 Operation mode
Fact.: OFF
ON
Lock time
Anti-freeze
Call up Selection menu
▲▼ Select Pellet/oil/gas
Confirm selection
Exit menu
▲▼ Select Operation mode
Confirm selection
Exit menu
▲▼ Select menu item
Confirm selection
▲▼ Change value
Confirm value
Exit menu
20.01 Operation mode OFF
Possible settings: "OFF" / "ON" / "Lock time" / "Anti-freeze".
OFF: The pellet/oil/gas boiler is disabled and there is no Anti-freeze available.
ON: The pellet/oil/gas boiler is operating in accordance with the settings in 20.06.
Lock time: The pellet/oil/gas boiler is disabled during the lock time, except if there is an Anti-freeze request.
Anti-freeze: It is set to Anti-freeze.
8.1.2 Settings
Selection
Pellet/Oil/Gas
Pellet/Oil/Gas
Operation mode
Settings
Settings
20.02 Lock time from
Fact.: 00:00
20.02 Lock time to
Fact.: 00:00
20.06 Enabling
Fact.: 42°C
Call up Selection menu
▲▼ Select Pellet/Oil/Gas
Confirm selection
Exit menu
▲▼ Select Settings
Confirm selection
Exit menu
▲▼ Select menu item
Confirm selection
▲▼ Change value
Confirm value
Exit menu
20.02 Lock time from 00:00
20.02 Lock time to 00:00
The period during which the burner is switched off, except for an Anti-freeze request.
In order to delete the lock time, set the same time for from to.
20.06 Enabling 42°C Setting range: 8°C 80°C
The pellet/oil/gas enabling occurs if "Acc. t.-F4" 20.06 Enabling. Then the burner operates in the assigned mode. If
"Acc. t.-F4" rises to 20.06 Enabling + 3K then the enabling is withdrawn.
By pressing the (Recharge) it is switched to accumulator mode.

Table of Contents