Heska Element COAG - Search by Patient ID; Search by Sample ID

Chapter 4
4.2. Performing a Database Search
Sample ID Supply a text string for filtering the results based on the user-supplied Sample
IDs. See Section 4.2.2 for details.
From date & To date Supply dates for filtering the results based on the test dates when
the analyses were performed. See Section 4.2.3 for details.
Test type Use the to the right of the text field to toggle which test types to show in a
results search. See Section 4.2.4 for details.
4.2.1. Search by Patient ID
1. Touch History on the Home screen, and then touch Search on the lower right
hand side of the Memory screen to access the Search Menu.
2. On the Search Menu, touch the purple arrow button across the Patient ID field to
access the on-screen keyboard to type in the designated information required to
retrieve the corresponding measurement data for a specific patient.
3. Touch Done when finished registering the search entry.
4. To begin the search, touch Search on the lower right hand side of the screen. To
restart the search process touch Clear All.
5. If the Search-button was previously touched, the results gathered will be shown.
6. To start anew, touch Back.
i
Writing the whole Patient ID info is not necessary. You can write the word or
just part of the word as the search phrase.
4.2.2. Search by Sample ID
1. Touch History on the Home Screen, and then touch Search on the lower right
hand side of the Memory screen to access the Search Menu.
2. On the Search Menu, touch the purple arrow button across the Sample ID field to
access the on-screen keyboard to type in the designated information required to
retrieve the corresponding measurement data for a specific patient.
3. Touch Done when finished registering the search entry.
4. To begin the search, touch Search on the lower right hand side of the screen. To
restart the search process touch Clear All.
5. If the Search-button was previously touched, the results gathered will be shown.
6. To start anew, touch Back.
39