About this Guide
This Operator’s Guide is written for Heska Element COAG
™
Analyzers with software
newer than version
03102017_0848
. Please refer to
Section 3.2.2
for information regard-
ing finding the version of the software currently installed on the analyzer and instructions
to upgrade to the newest version.
The following symbols and convention are used in this guide:
Bold Used for menu, command and keyboard selections and screens you will see.
Italics
Used for emphasis.
i
Helpful information about a particular topic.
!
Important information to prevent problems and ensure that you are successful
in using the instrument.
Technical Support
For any inquiries about the instrument or use of the test cartridges, contact your Distributor
or Heska Corporation Customer Support.
See contact information below:
Heska Corporation
3760 Rocky Mountain Avenue
Loveland, Colorado 80538
USA
T 800-464-3752
Í www.heska.com
vii