Panic Alarm Master Station • User Manual
15
Collecting Alarm Devices
Purpose:
You are able to add focus alarm devices to favorites group, it is convenient to view the alarm device and
communicate with the alarm device in the favorites group.
Steps:
On the Group page, tap All Devices to enter the page.
Select an alarm device in the device list, and tap asterisk. If the asterisk is blue, the alarm device is collected,
otherwise, the alarm device is not collected.
Note: Devices that have been collected are displayed in the device list of the favorites group.
Deleting All Disconnected Alarm Devices
Purpose:
You are able to empty offline alarm devices for easy management.
Steps:
On the Group page, tap All Devices to enter the page.
Long press any one of disconnected alarm devices, and tap Delete All Disconnected Devices.
Tap OK to delete all disconnected alarm devices, or tap Cancel to cancel the operation.
Note: After restarting, the deleted disconnected alarm devices do not appear in the device list.
Editing General Information of Alarm Device
Note: The general information only can be edited if the master station is the main master station (that is, the
master station double as a SIP server).
Steps:
On the Group page, tap All Devices to enter the page.
Select and tap an alarm device to enter the alarm device configuration page.
Tap General Information, you are able to edit the name and location of the alarm device.
Tap OK.
Setting Call Forwarding of Alarm Device
Purpose:
In this section, you can enable the call forwarding for alarm device. IF the call forwarding of the alarm device is
enabled, the SIP server will transfer the call to the first priority master station when receive a call from this alarm
device. If the first priority master station dose not answer the call, for example, it is on the line or offline, the
take time exceeds the call waiting time, call forwarding by manual, or master station call list is full, the SIP server
will transfer the call to the next priority master station.
Notes: