Hioki 3227 - Page 117

105
────────────────────────────────────────────────────
8.4 Command Reference
────────────────────────────────────────────────────
Synta
x
:SAMPle?
Functio
n
Returns the current measurement sampling rate as FAST, MEDIUM, or
SLOW (data).
Respons
e
If headers are ON
If headers are OFF
:SAMPLE data
data
Erro
r
When the measurement mode is set to the temperature measurement, the
execution error is generated.
Exampl
e
If headers are ON
If headers are OFF
Transmission
Response
:SAMP?
:SAMPLE MEDIUM
:SAMP?
MEDIUM
Synta
x
:TC data
dat
a
ON, OFF (character data)
Functio
n
Sets whether the temperature correction function is ON or OFF.
Erro
r
The execution error is generated in the following circumstances.
･ When the measurement mode is set to the temperature measurement.
･ When the temperature conversion function is selected at power on.
Exampl
e
Transmission
:TC ON
The temperature correction function is used.
Synta
x
:TC?
Functio
n
Returns the current temperature correction function setting, as ON or OFF
(data)．
Respons
e
If headers are ON
If headers are OFF
:TC data
data
Erro
r
The execution error is generated in the following circumstances.
･ When the measurement mode is not set to the resistance measurement.
･ When the temperature conversion function is selected at power on.
Exampl
e
If headers are ON
If headers are OFF
Transmission
Response
:TC?
:TC ON
:TC?
ON
:SAMPle?
:TC
:TC?