Hioki 3227 - Page 94

82
────────────────────────────────────────────────────
8.4 Command Reference
────────────────────────────────────────────────────
Synta
x
*
OPC
Functio
n
When a number of commands are written on one line, the
*
OPC command
sets the bit 0 (the OPC bit) of the standard event status register (SESR) to
1 at the instant the previous commands have been completed.
Exampl
e
Transmission
*RST;:MEAS:RESI?;*OPC;:HOLD OFF
When the entire action of the commands *RST and MEAS has been
completed, the designated bit is set to 1.
Synta
x
*
OPC?
Functio
n
The same as the
*
OPC command, except in that,at the instant that the
previous commands have been completed,instead of bit 0 (the OPC bit) of
the standard event status register (SESR) being set to 1, the response
message 1 is returned.
Respons
e
Whether headers are on or off
1
Exampl
e
Transmission
*RST;:MEAS:RESI?;*OPC?;:HOLD OFF
When the entire action of the commands
*
RST and MEAS has been
completed, the response message 1 is returned.
*
OPC
*
OPC?