Hioki 3541 - Page 144

8.6 Message Reference
138
BCD Output Setting
Syntax
Command
Query
Response
:SYSTem:EXTernalout <BIN or BCD>
:SYSTem:EXTernalout?
<BIN or BCD>
Example
Command
:SYST:EXT BCD
Query
Response
:SYST:EXT?
BIN
Note
• BIN output is disabled when BCD output is selected.
• BCD output is disabled when BIN output is selected.
Delimiter Setting
Syntax
Command
Query
Response
:SYSTem:TERMinator <0 or 1>
:SYSTem:TERMinator?
<0 or 1>
0 ....... LF+EOI
1 ....... CR,LF+EOI
Example
Command
:SYST:TERM 1
Query
Response
:SYST:TERM?
0
Note • At power-on, this is set to 0 (LF+EOI).
• The RS-232C delimiter is fixed as CR + LF.
System Reset
Syntax
Command
:SYSTem:RESet
Description
Command Returns all settings, including any saved data, to factory default
settings.
Example
Command
:SYST:RES
Note
If you want to preserve saved data, use the ∗RST command instead.