Hioki 3541 - 10.2 Error Display Codes

9.1 General Specifications
162
Comparator Decision Hi Display Value > Upper Threshold, or OF
IN Upper Threshold
≥ Display Value ≥ Lower Threshold
Lo Lower Threshold > Display Value, or -OF
Absolute value
decision
Display Absolute Value
Upper/Lower Threshold range: 0 to 999,999 dgt
Relative value
decision
Display {(Measured Resistance)
− (Reference Value)} /
(Reference Value)
-99.999% to 99.999%
Reference Value setting: 0 to 999,999 dgt
Tolerance (%) setting: 00.000 to 99.999%
Beeper OFF, IN, Hi/Lo
BIN measurements Decision IN Upper Threshold ≥ Display Value ≥ Lower Threshold
Absolute value
decision
Display Absolute Value
Upper/Lower Threshold range: 0 to 999,999 dgt
Relative value
decision
Display Absolute Value
Reference Value setting:0 to 999,999 dgt
Tolerance (%) setting: 00.000 to 99.999%
BINs 10
Reset function Reset Returns all settings except SAVE data to factory defaults
System Reset
(Remote
Command only)
Returns all settings including SAVE data to factory defaults