Hioki 3541 - Page 70

5.6 Statistical Calculation Functions
64
Confirming Statistical Calculation Results
1
The Statistical Calculation display appears.
2
The indication on the display changes as follows with each key-press.
(Sub Display)
Total data count → Mean (indicated as "Average") → Maximum →
Minimum → Overall standard deviation → Standard deviation of
sample
→ Process capability indices
Total data count Mean
Maximum Minimum
Overall standard deviation Standard deviation of sample
Process capability indices ON/OFF/CLR setting
Valid data
Mean
Maximum
Data Sample
No.
Maximum
Data Sample
No.
Cp
Cpk
• No calculation results can be displayed when there are no valid
data samples.
• When only one valid data sample exists, standard deviation of
sample and process capability indices cannot be displayed.
Sending Statistical Calculation Results to the Printer
With the statistical calculation results displayed, press the PRINT key.
The statistical calculation results are output to the optional printer.
❖ Chapter 7 Printer (Optional) (Page 87)