Hioki PQ3198 - Page 194

12.4 Downloading Recorded Data to Computer
188
FTP server settings
Setting Contents:
Authentification
Enable when trying to restrict connection to the FTP server.
(Enable the Authentication and set a User name and Password.)
User name
Configure a user name used when connecting an FTP client to the instrument.
(Up to 20 one-byte characters, example: HIOKI)
Password
Configure a password used when connecting an FTP client to the instrument.
The password does not appear
on the screen (displayed as ****************).
(Up to 20 one-byte characters, example: PQ3198)
Download
Host name IP address of the instrument
(p.180)
User name When FTP authentication is
enabled, enter the setting of
the instrument.
Password
1. Run an FTP client software.
This section explains an example of using a free software WinSCP.
Explorer can be used when the FTP authorization is not used.
2. Enter the following and click [Login].
3. Click [PQ3198].
HIOKI PQ3198A961-02