Use the included PQ ONE application.
ction manual.
4. Copy to any folder by selecting a folder or file.
•To copy measured data, copy the “Folder for saving data”.
See:"9.3 Save Operation and File Structure" (p.161)
•Do not move any folder or file. It is recommended to delete the folder and file after the data is copied
and checked.
• Unintended operations may occur if operation is attempted from multiple computers simultaneously.
Use one computer at a time when operating.
• The instrument may lose connection if no operation is done for 3 minutes or more after making connec-
tions. In such case, start over from procedure 1.
• FTP may not connect when trying to reconnect after being disconnected. In such case, try reconnect-
ing after waiting for about one minute.
• The file being recorded cannot be downloaded during recording. When wanting to download a file
while continuing to record, have Recording start configured to [Repeat Record] (p.79). Since record-
ing will repeatedly start and stop after each day when repeat is set to 1 day, the folder used to store
data will be segmented, and you will be able to download measurement data up to the previous day.
• When changing the SD memory card, stop the measurement.
• Avoid accessing any files at the same time as when downloading from within the instrument or exter-
nally using such tools as telnet and GENNECT Cross. Doing so may cause unintended results.
• Date/time of file update between the Internet browser and the instrument may not be identical.
• Previous data excluding the latest one may end up getting downloaded to the computer (as data left
from the previous access gets saved as temporary Internet files in web browsers).
To Next Page
Loading...
