4.3 Configuring the Connection Mode and Current Sensors
56
3P3W2M
3P3W3M
The vector diagram shows the measure-
ment line in its ideal (balanced) state.
The L1021-01, L1021-02 Patch Cord can be
used to consolidate two cords being connected
to the same phase into a single cord.
The vector diagram shows the measure-
ment line in its ideal (balanced) state.
The L1021-01, L1021-02 Patch Cord can be
used to consolidate two cords being connected
to the same phase into a single cord.
To Next Page
Loading...
