101
Chapter 6 Starting and Stopping Recording and Measurement
6
The method used to start and stop recording is set with the [REC START] and [REC
STOP] settings on the [SET 4/8, REC 2] screen. Recording and measurement data
is saved to the destination selected on the [SET 3/8, REC 1] screen.
See: 4.3, "Changing Recording (Save) Settings" (p. 69)
Starting and Stopping
Recording and
Measurement
Chapter 6
MANUAL
TIME
INTERVAL
Recording start method
Starts recording when the Start/Stop key is
pressed.
Starts recording when the specified time is
reached.
Starts recording at an even division based on
the save interval time.
REPEAT
Repeats recording while segmenting files every
day. Recording is started on the repeat start date.
MANUAL
TIME
Recording stop method
Stops recording when the Start/Stop key is
pressed.
Stops recording when the specified time is
reached.
TIMER
REPEAT
Recording is stopped automatically when the set
timer time has elapsed.
Recording is repeated while segmenting files every
day. Recording is stopped when the recording time
period on the repeat stop date ends.
Recording LED
Flashing: Recording
standby
On: Recording
To Next Page
Loading...
