1.1 Product Overview
11
3
1
Chapter 1 Overview
The PW3360 Clamp on Power Logger is a clamp-type power meter capable of mea-
suring lines with from single-phase to three-phase four-wire.
In addition to basic measurements including voltage, current, power, power factor,
and energy, the instrument can perform demand measurement and harmonic mea-
surement (PW3360-21 harmonic model only), which are important parameters in
power management.
The Quick Set makes the instrument simple enough to be used even by beginners
by enabling them to configure basic settings, wirings, recording settings, and the
start of recording through a series of steps.
The PW3360 Clamp on Power Logger supports extended data acquisition and auto-
mated measurement, thanks to the use of the SD memory card and USB/LAN inter-
face. This makes the PW3360 Clamp on Power Logger suitable for power
measurement at commercial frequencies involved in the power maintenance and
management of a building or factory.
Overview Chapter 1
1.1 Product Overview
To Next Page
Loading...
