8.5 Loading Settings Files
123
3
Chapter 8 Saving Data and Manipulating Files
8
This section describes how to load a settings file that was previ-
ously saved on the SD memory card or in the instrument’s internal
memory.
8.5 Loading Settings Files
LAN settings are not loaded.
SD Memory Card
1
Press the key to display the
[FILE, SD] screen.
2
Select the settings file (with the
.SET extension) to load.
: Move within the folder
hierarchy.
: Move up and down.
(Select folders and files)
Settings files saved using the functional-
ity provided by the instrument for saving
settings can b
e found in the
[PW3360]
-[SETTING]
folder.
3
Press the [SET.LOAD] key.
4
When the confirmation dialog box
is displayed, press the [YES] key.
To Next Page
Loading...
