9.1 Copying Data to a Computer (SD)
130
This section describes how to eject the SD memory card from the instrument and
copy data from the card to a computer. If the computer does not have an SD mem-
ory card slot, please purchase an SD memory card reader.
You can also download instrument data (from the SD memory card or the instru-
ment’s internal memory) to a computer using the instrument’s USB or LAN function-
ality.
See: Chapter 10, "Using Communications (USB/LAN)" (p. 147)
Windows7
9.1 Copying Data to a Computer (SD)
1
Verify that recording and measure-
ment have stopped.
Removing a card while data is being
written to it may damage the card.
2
Eject the SD memory card from the instru-
ment.
3
Insert the SD memory card into the SD memory card slot on the computer.
To Next Page
Loading...
