6.1 Starting Recording
102
6.1 Starting Recording
Do not remove the SD memory card while recording is in prog-
ress. If the SD memory card is removed during recording, mea-
surement data will be saved in a new file (with a sequentially
numb
e
red suffix) when the card is reinserted.
Similarly, if the recording and measurement data file or harmonic
measuremen
t data file exceeds 200 MB, all data files being
recorded (recording and measurement, harmonic measurement,
and waveform) will be segmented, and data will be saved to new
files (each with a sequentially numbered suffix).
See: 8.2, "Folder and File Structure" (p. 116)
Starting Recording Manually
1
Set the recording start method on the
[SET 4/8, REC 2] screen to [MAN-
UAL].
2
Press the key on the
Measurement screen.
Recording will start (and the Record-
ing LED will light up).
To Next Page
Loading...
