4.4 Changing System Settings (as Necessary)
77
3
Chapter 4 Changing Settings
4
You can change system settings on the [SET 5/8, SYS 1] and [SET 6/8, SYS 2] Set-
tings screens.
Clock
Sets the date and time (using the Western calendar and 24-hour time).
See: "Specifying a time" (p. 75)
Beep sound
Turns the key press beep on and off.
LCD backlight
Selects whether to automatically turn off the LCD backlight.
4.4 Changing System Settings (as Necessary)
System 1 Setting Screen
The seconds cannot be set. After changing the time, pressing the
Enter key causes the seconds to be reset to 00.
Selection
ON/OFF
Selection
AUTO OFF
Automatically turns off the backlight once two minutes
have elapsed since the last key operation. The POWER
LED will flash while the backlight is off.
ON Keeps the backlight on at all times.