12.1 General Specifications
175
Chapter 12 Specifications
12
Specifications Chapter 12
12.1 General Specifications
Operating
environment
Indoors, Pollution degree 2, altitude up to 2,000 m (6562-ft.)
Operating
temperature
and humidity
-10°C to 50°C (14°F to 122°F), 80%RH or less (non-condensat-
ing)
When using LAN communications, 0°C t
o
50°C (32°F to 122°F),
When operating on battery power, 0°C to 40°C (32°F to 104°F),
when charging the battery, 10°C to 40°C (50°F to 104°F)
Storage
temperature
and humidity
-20°C to 60°C (-4°F to 140°F), 80%RH or less (non-condensating)
However, the battery’s storage temperature range is -20°C to
30°C (-4°F to 86°F).
Dielectric
strength
(50 Hz /60 Hz,
60 minutes)
4.29 kVrms (1 mA sense current)
Between voltage input terminals and external control terminals
Power supply
• Model Z1006 AC Adapter (12 V, 1.25 A)
Rated supply voltage 100 VAC to 240 VAC
(Voltage fluctuations of ±10% from the ra
ted supply voltage are
taken into account.)
Rated power supply frequency 50/60 Hz
anticipated transient overvoltage 2500 V
• Model 9459 Battery Pack (Ni-MH DC7.2 V 2700 mAh)
Charge function
Charges the battery regardless of whether the instrument is on or
off.
Charge time: Max. 6 hr. 10 min. (reference value at 23°C/73.4°F)
Maximum rated
power
• When the Z1006 AC Adapter is used
40 VA (including AC adapter)
13 VA (PW3360 instrument only)
• When the 9459 Battery Pack is used
3VA
Continuous
battery
operation time
Approx. 8 hr. (Continuous, backlight off)
(when using the battery pack)