5.5 Viewing Power Details (Channel Power Values)
88
Press the or [SCREEN] key to display the [MEAS, POWER] screen.
When using the 3-phase/3-wire/2-wattmeter method (3
P3W2M), the active power,
reactive power, apparent power, and power factor for each channel are obtained by
means of a two-wattmeter calculation process and do not have physical significance.
However, values for individual channels can serve as reference data when checking
the connection.
If you wish to check the balance of power values for individual channels on a 3-
phase/3-wire circuit, use the 3-phase/3-wire/3-wattmeter method (3P3W3M).
See: "Appendix2 Three-phase 3-wire Measurement" (p. A2)
5.5 Viewing Power Details (Channel Power
Values)
Per-channel
reactive power
Per-channel
active power
Total active
power
Total power
factor
Total reactive
power
Total apparent
power
Per-channel
power factor
Per-channel
apparent
power
To Next Page
Loading...
