Hioki PW3360-21 - Changing Recording (Save) Settings; Recording 1 Setting Screen

4.3 Changing Recording (Save) Settings
69
3
Chapter 4 Changing Settings
4
You can change the conditions used to record (save) measurement data on the
[SET 3/8, REC 1] and [SET 4/8, REC 2] Settings screens.
Save destination
Selects the save destination for measurement data.
Save interval
Selects the interval at which to save measurement data.
4.3 Changing Recording (Save) Settings
Recording 1 Setting Screen
Selection
SD card
Saves data on the SD memory card. If no SD memory
card is inserted, data will be saved in the instrument’s
internal memory.
Internal 
memory
Saves data in the instrument’s internal memory (capacity:
approximately 320 KB).
Selection
1 sec/2 sec/5 sec/10 sec/15 sec/30 sec,
1 min/2 min/5 min/10 min/15 min/20 min/30 min/60 min
Data storage time
Since the instrument
can perform recording
and measurement for a
maximum of one year,
the maximum data stor-
age time is one year.