Safety Information
4
This instrument is designed to comply with IEC 61010 Safety Standards, and has
been thoroughly tested for safety prior to shipment. However, mishandling during
use could result in injury or death, as well as damage to the instrument. Using the
instrument in a way not described in this manual may negate the provided safety
features.
Before using the instrument, be certain to carefully read the following safety notes.
This manual contains information and warnings essential for saf
e operation of the
instrument and for maintaining it in safe operating condition. Before using the instru-
ment, be certain to carefully read the following safety notes.
Symbols on the instrument
Safety Information
Mishandling during use could result in injury or death, as well
as damage to the instrument. Be certain that you understand
the instructions and precautions in the manual before use.
With regard to the electricity supply, there are risks of electric
shock, heat generation, fire, and arc discharge due to short
circuits. If persons unfamiliar with electricity measuring
instruments are to use the product, another person familiar
with such instruments must supervise operations.
In the manual, the symbol indicates particularly important
information that the user should read before using the instrument.
The symbol printed on the instrument indicates that the user
should refer to a corresponding topic in the manual
(marked with
the symbol) before using the relevant function.
Indicates a grounding terminal.
Indicates AC (Alternating Current).
Indicates DC (Direct Current).
Indicates the ON side of the power switch.
Indicates the OFF side of the power switch.
To Next Page
Loading...
