Confirming Package Contents
3
Options
Current measurement options
• 9272-05 Clamp On Sensor (20 A/200 A AC)
• CT6841-05 AC/DC Current Probe (20 A)
• CT6843-05 AC/DC Current Probe (200 A)
• CT6844-05 AC/DC Current Probe (500 A, 20 mm)
• CT6845-05 AC/DC Current Probe (500 A, 50 mm)
• CT6846-05 AC/DC Current Probe (1000 A)
• PW9100-03 AC/DC Current Box (50 A, 3 channels)
• PW9100-04 AC/DC Current Box (50 A, 4 channels)
• CT6862-05 AC/DC Current Sensor (50 A)
• CT6863-05 AC/DC Current Sensor (200 A)
• 9709-05 AC/DC Current Sensor (500 A)
• CT6904 AC/DC Current Sensor (500 A)
• CT6865-05 AC/DC Current Sensor (1000 A)
• CT9557 Sensor Unit (sensor power supply with 4-channel addition function)
• CT9904 Connection Cable (for connecting the CT9557)
• CT9900 Conversion Cable (PL23 receptacle/ME15W plug)
• Special-order: 5 A rated version of the PW9100
• Special-order: 2000 A pass-through sensor
• Special-order: High-accuracy version of the 9709-05
• Special-order: High-accuracy version of the CT6862-05
• Special-order: High-accuracy version of the CT6863-05
• CT7742 AC/DC Auto-Zero Current Sensor (2000 A)
• CT7642 AC/DC Current Sensor (2000 A)
• CT7044 AC Flexible Current Sensor (6000 A, 100 mm)
• CT7045 AC Flexible Current Sensor (6000 A, 180 mm)
• CT7046 AC Flexible Current Sensor (6000 A, 254 mm)
• CT9920 Conversion Cable (PL14 receptacle/ME15W plug)
Voltage measurement options
• L9438-50 Voltage Cord (banana/banana; 1 each red and black; with alligator clips/approx. 3 m)
• L1000 Voltage Cord (banana/banana; 1 each red, yellow, blue, and gray; 4 black; with alligator clips/approx. 3 m)
• L4931 Extension Cable Set (banana/banana; 1 each red and black/
approx.
1.5 m, for extending the
L9438-50 or L1000)
• L1021-01 Patch Cord (branched bananas/banana; 1 red/approx. 0.5 m, for branching the L9438-50 or L1000)
• L1021-02 Patch Cord (branched bananas/banana; 1 black/approx. 0.5 m, for branching the L9438-50 or L1000)
• 9243 Grabber Clip (1 each red and black)
• PW9000 Wiring Adapter (for three-phase 3-wire)
• PW9001 Wiring Adapter (for three-phase 4-wire)
Connection options
• L9217 Connection Cord (isolated BNC/isolated BNC; 1.6 m; for motor analysis input)
See "8.5 Using the Motor Testing" (p. 174)
• Special-order: D/A Output Cable (25-pin D-sub/male BNC; 16-channel conversion/2.5 m)
• 9683 Connection Cable (for synchronization /1.5 m)
See "Connecting Multiple PW3390 (Synchronized Measurements)" (p. 157)
• 9642 LAN Cable (5 m, with straight/cross conversion connector)
• 9637 RS-232C Cable (9pin-9pin/1.8 m, crossing cable)
Other options
• 9728 PC Card 512M (512 MB CF Card + Adapter)
• 9729 PC Card 1G (1 GB CF Card + Adapter)
• 9830 PC Card 2G (2 GB CF Card + Adapter)
• 9794 Carrying Case (PW3390 dedicated hard type)
• Special-order: Rack mounting hardware (EIA/JIS)
To Next Page
Loading...
