Usage Notes
7
Follow these precautions to ensure safe operation and to obtain the full benefits of the various functions.
Before using the instrument the first time, verify that it operates normally to ensure that the no damage
occurred during storage or shipping. If you find any damage, contact your authorized Hioki distributor or
reseller.
Installing
• The instrument should be operated only with the bottom or rear side downwards.
• Vents (on the right side of the instrument) must not be obstructed.
Usage Notes
Before use
Before using the instrument, make sure that the insulation on the voltage cords
is undamaged and that no bare conductors are improperly exposed. Using the
instrument in such conditions could cause an electric shock, so contact your
authorized Hioki distributor or reseller for replacements.
Instrument installation
Avoid the following locations that could cause an accident or damage to the instrument.
Exposed to direct sunlight
Exposed to high temperature
In the presence of corrosive or
explosive gases
Exposed to liquids
Exposed to high humidity or
condensation
Exposed to strong electromag-
netic fields
Near electromagnetic radiators
Exposed to high levels of par-
ticulate dust
Near induction heating systems
(e.g., high-frequency induction
heating systems and IH cooking
utensils)
Subject to vibration
50 mm or more
50 mm or more
To Next Page
Loading...
