Hioki PW3390 - Chapter 6 Changing System Settings

127
6
Chapter 6 Changing System Settings
On the [System] page, view the instrument's version information and change settings such as display
language, beep sounds, and screen colors.
Changing System
Settings Chapter 6
[System] Page Display
Press followed by to display the [System] page.
Enable/disable beep sounds.
(p. 128)
Select screen colors.
(p. 128)
Select the display
language. (p. 128)
Set LCD backlighting.
(p. 128)
View the instrument's
firmware version number.
View the instrument's
serial number.
Execute system reset.
(p. 130)
Check the instrument’s
MAC address.
Select the startup (initial) screen.
(p. 129)
Configure zero
suppression. (p. 129)
Set the system's
real-time clock.(p. 129)
Set the CSV file format.
Check the instrument model.