11.4 Disposing of the Instrument
226
When disposing of this instrument, remove the lithium battery and dispose of battery and instrument in
accordance with local regulations.
Dispose the other options appropriately.
11.4 Disposing of the Instrument
• To avoid electric shock, turn off the power switch and disconnect the power
cord and measurement cables before removing the lithium battery.
• Battery may explode if mistreated. Do not short-circuit, recharge, disassemble
or dispose of in fire.
• Keep batteries away from children to prevent accidental swallowing.
Tools required: One No. 2 Phillips screw-
driver, tweezers
1. Turn the instrument's power switch off.
2. Disconnect the power cord and all cables.
3. Remove the six Phillips head screws in the
rear cover, and remove the cover by sliding it
back.
4. Remove the six Phillips head screws around
the front panel, and remove the panel.
5. Insert the tweezers between the battery and
its holder on the internal board, and lift the
battery to remove it.
CALIFORNIA, USA ONLY
This product contains a CR Coin Lithium Battery
which contains Perchlorate Material - special han-
dling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Lithium Battery Removal
To Next Page
Loading...
