7.10 Reloading Setting Configurations
150
Previously saved settings can be reloaded from setting configuration files.
7.10 Reloading Setting Configurations
Loading Procedure (Example: loading a setting configuration file from a CF card folder)
Display the
[CF card] page
or to open a folder
keys to select a setting
configuration file
(or )
(A dialog appears.)
Enter: .
Cancel: .
keys to select a folder
• In order to restore settings, the instrument model and sensor setup must be the
same. Otherwise, the settings will not be restored.
For example, the settings file for a PW3390-01 cannot be loaded by a PW3390-02.
• Loading a settings file saved by an instrument running firmware older than Version
2.00 on an instrument running Version 2.00 or newer firmware may cause the Mea-
surement screen being displayed to change.
• With the exception of backing up settings before and after upgrading an instrument,
it is not recommended to load settings files saved by an instrument running a differ-
ent version of the firmware.
To Next Page
Loading...
