6.1 Initializing the Instrument (System Reset)
130
If the instrument operates abnormally, see "Before returning for repair" (p. 220)“.
If the cause cannot be determined, perform a system reset.
To return all instrument settings to their factory defaults, hold the key while turning the power on.
This is called a 'power-on reset'. All settings including the display language and communication settings
are initialized.
6.1 Initializing the Instrument
(System Reset)
1
2
Press [Reset].
(A dialog box appears.)
3
Select the item
Enter
Cancel
System reset returns all except the display language and communication settings to their
factory defaults. All measurement data is erased from the screen and from internal memory.
See "6.2 Factory Default Settings" (p. 131)
Power-On Reset
1 Turn off the instrument power.
See "3.8 Turning the Power On and Off" (p. 33)
2 Press the key while turning the power on, and hold the key until the
message
"BOOT-KEY-RESET READY. Please release the SHIFT key." appears.
To Next Page
Loading...
