[Motor]
[Wiring]
[D/A Out]
Select the appropriate wiring mode (phase system configu-
rations) and execute quick setup on this page. Wiring dia-
grams for each mode depict the appropriate
measurement cable connections.
Make D/A output-related settings on this page.
Make motor measurement-related settings
on this page.
[Sensor]
[Input]
Make detailed measurement criteria settings
on this page.
[Calc]
Make calculation-related settings on this page.
Setting Screen (Press the key to display)
Press the keys to change the screen page as follows.
Use this screen to view and change settings for measurement criteria,
wiring mode, wiring check and system environment configuration.
To next page
Displayed only on the
PW3390-03 (model
with motor analysis
and D/A output).
To Next Page
Loading...
