Hioki PW3390 - Page 60

4.2 Viewing Power Measurements, and Changing the Measurement Configuration
52
Ranges can be set on the following Measurement screen pages: [Vector], [CH] (any), [Wave + Noise],
[Select], and [Input]. Change the range with the RANGE keys.
Range Setting Procedure
For Manual range selection, press the / key of
the RANGE keys to select the desired range.
Current RangeVoltage Range
For Auto range selection, Press the key of the RANGE
keys.
Setting from the [Vector] Page of the Measurement Screen
Display the
[Vector] page
Press the RANGE keys to select the range
Select the channel
to change
Setting from the [CH] Pages of the Measurement Screen
Press the RANGE keys to select
the range
Select the channel
to change