10 Servicing
304
SMGB0077 rev.0 - 01/2013
10.1 RCI - 4-way cassette (1.0-6.0)FSN3
10.1.1 Removing Air Filter and Air Inlet Grille
1 The air îš¿lter is attached inside the air inlet grille. While pushing
both ends of knobs at the air inlet grille toward the arrow
direction, open the air inlet grille.
2 Hold the lower side of the air inlet grille keeping it inclined.
Remove the hooks of air îš¿lter from the air inlet grille and
remove the air îš¿lter.
3 Remove the supporting string from the air panel.
After lifting the air inlet grille keeping it inclined, draw the air
inlet grille forward to remove.
4 When attaching the air inlet grille, the supporting string shall be
attached to the air panel.
C A U T I O N
TURN OFF all power source switches.
Knob
Air Inlet Grille
Upper Part of Filter
Hook
Hook
Lower Part of Filter
Air Filter
Air Inlet Grille
Supporting String
To Next Page
Loading...
Need help?
General
