1g. [Power Options] window appears. Confirm [Plans shown on the battery meter] is
[Balance], and click [Change plan settings].
Click
Figure 2.2.7-7 Select a power plan
1h. [Edit Plan Settings] window appears. Change [Turn off the display], [Put the computer
to sleep] and [On battery] [Plugged in] both to [Never]. Click [Save changes]
Back to 1g, and change the mode to [Power saver].
Click（Back to Figure 2.2.7-7）
Change to [Never]
Click
Figure 2.2.7-8 Edit Plan Settings
2 - 24
To Next Page
Loading...
