xvi
Related Documents
The following documents provide information on topics related to this guide:
ACUIX™ Terminology
This document uses the following terms to describe the main hardware
components of the ACUIX PTZ dome:
Document Title Part Number
ACUIX™ PTZ Dome Quick Installation Guide
800-02219
ACUIX™ Indoor and Outdoor Housings Installation Guide
800-01760
ACUIX™ Series Rugged Housing and Dome Installation Guide
800-02026
Dome The complete installed product including the housing,
mount or adapter, scan assembly, and bubble.
Housing The in-ceiling, pendant, or rugged outer enclosure that
houses the scan assembly. It contains an interface board
for connecting power, video, control data, and alarm wiring
to the dome. The housing is a component of the dome.
Mount The hardware used to support the housing. It may be
included with the housing (as with in-ceiling and rugged
housings) or available for purchase separately (as with
indoor or outdoor pendant housings). The mount is a
component of the dome.
Scan
Assembly
A combination of mechanical, electrical, and software
components, including the camera block and firmware. It is
installed inside the housing and enclosed by the bubble.
The scan assembly is a component of the dome.
Camera The particular model of camera purchased. The camera is
a component of the scan assembly.
Bubble The optically transparent hemisphere that fits onto the
bottom of the housing, enclosing the scan assembly. It is
available in clear or colored versions. The bubble is a
component of the dome.
To Next Page
Loading...
