Honeywell ACUIX - Displaying the Time and Date

ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Document 800-05662V1 Rev A 21
04/11
Displaying the Time and Date
You can show the current time and date on the screen. The time is displayed at
the lower left center of the screen, the date at the lower right center of the screen.
To show/hide the current time:
• Select 7 Enhanced Settings
 5 Time & Date Settings  1 Display Time
 ON or OFF (default).
To change the time setting:
1. Select 7 Enhanced Settings  5 Time & Date Settings  4 Change Time .
2. Enter the new time in HH:MM:SS (hours:minutes:seconds) format
using the
controller joystick.
3. Press Iris Open to accept the new time, or press Iris Close to cancel.
To change the time format:
• Select 7 Enhanced Settings
 5 Time & Date Settings  3 Time Format
 24 Hours (default) or 12 Hours.
To show/hide the current date:
• Select 7 Enhanced Settings
 5 Time & Date Settings  2 Display Date
 ON or OFF (default).
To change the date:
1. Select 7 Enhanced Settings  5 Time & Date Settings  5 Change Date .
2. Enter the new date in YYYY-MM-DD (year-month-day) format using the
controller joystick.
3. Press Iris Open to accept the new time, or press Iris Close to cancel.