12
Preparing to Configure the Dome
Accessing the Main Menu
To begin configuring the dome settings, call up the main menu on your monitor
screen using special preset 90.
Note Because the ACUIX High-Speed PTZ Dome is designed to work with
a wide variety of devices and protocols, all possible ways to perform a
task are not given here. The instructions in this guide are intended to
supplement the instructions provided in your controller’s user guide.
To access the main menu:
• Enter preset 90 on your controller.
On the UltraKey Touch controller, press View, type 90, and then press Enter.
On the HJZTP controller, type 90, and then press Preset.
The main menu (Figure 3-1) appears.
Figure 3-1 OSD Main Menu
---- ACUIX Dome ----
Camera............35x WDR&FNR
-----------------------------
1 Language............English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
7 Enhanced Settings
IRIS CLOSE to Exit
To Next Page
Loading...
