Honeywell ACUIX - Viewing a List of Sectors; Deleting a Sector

ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Document 800-05662V1 Rev A 71
04/11
Viewing a List of Sectors
You can view the list of programmed sectors on the screen.
To view a list of sectors:
• Select 6 Function Programming
 4 List PS/PT/Sectors  3 Sectors.
Deleting a Sector
You can delete a sector that you have programmed.
Using MAXPRO-mode/VCL/VCL UTC/Pelco P/Pelco D protocol:
1. Select 6 Function Programming
 7 Delete PS/PT/MT/ Sectors.
2. Locate and select the sector you want to delete. If the deletion is
successful, the message
Delete Success appears.
Using Diamond/IntelliBus protocol:
• Go to the Program menu and delete the sector.