Honeywell ACUIX - Displaying the Zoom Magnification; Displaying the Startup Screen; Displaying Crosshairs

ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Document 800-05662V1 Rev A 19
04/11
Displaying the Zoom Magnification
You can show the camera’s zoom magnification level on the screen.
To show/hide the zoom magnification:
• Select 2 Display Options
 4 Digital Zoom Mag  ON or OFF (default).
Displaying the Startup Screen
A startup screen appears when you first power up the dome, displaying the
protocol, baud rate, parity, data bits, camera type, and firmware version of the
dome. You can turn off the startup screen so that it does not appear the next time
you power up the dome.
To show/hide the startup screen message:
• Select 2 Display Options
 5 Start-up Screen Msg  ON (default) or
OFF.
Displaying Crosshairs
You can show crosshairs on the screen to aid in positioning the camera. This is
helpful for setting up privacy zones and sectors.
To show/hide crosshairs:
• Select 2 Display Options
 8 Crosshairs  ON or OFF (default).