20
Configuring the OSD
Displaying Dome Names
You can create a dome name and manage its on-screen display settings.
To create a dome name:
1. Select 2 Display Options
9 Dome Name Settings 1 Set Dome
Name.
2. Enter a name for the dome (up to 24 alphanumeric characters) using the
controller joystick.
To show/hide a dome name:
• Select 2 Display Options
9 Dome Name Settings 2 Display Dome
Name
ON or OFF (default).
To change the location of the dome name on the screen:
1. Select 2 Display Options
9 Dome Name Settings 3 Change Dome
Name Location.
2. Position the dome name on the screen by moving the controller joystick up
or down.
Displaying the Pan, Tilt, and Zoom Coordinates
You can show the dome’s pan (azimuth), tilt (elevation/declination), and zoom
coordinates on the screen.
To show/hide the pan and tilt coordinates:
• Select 4 Diagnostic Options
1 Coordinates ON or OFF (default).
To Next Page
Loading...
