Honeywell ACUIX - 10 Installing Dome Firmware; About the Firmware Downloader Tool

Document 800-05662V1 Rev A 73
04/11
10
Installing Dome Firmware
This chapter contains the following sections:
• About the Firmware Downloader Tool, page 73
• Before You Begin, page 74
• Updating Firmware Using the Downloader, page 74
About the Firmware Downloader Tool
You can update your dome’s firmware using the ACUIX™ Analog Firmware
Downloader tool. The instructions in this section are intended to supplement the
on-screen instructions provided with the Downloader.
The Downloader is designed to update both NetCore and NetCore 2 circuit
boards:
Board Type Scan Assembly (NTSC/PAL) Camera Type
NetCore HDCAN0000
HDCJN0000
HDCFN0000
HDCGN0000
HDCAP0000
HDCJP0000
HDCFP0000
HDCGP0000
18× Color (HDXA)
18× WDR/TDN (HDXJ)
26× WDR/TDN (HDXF)
35× WDR/FNR (HDXG)
NetCore 2 HDCAN0000V2
HDCJN0000V2
HDCFN0000V2
HDCGN0000V2
HDCAP0000V2
HDCJP0000V2
HDCFP0000V2
HDCGP0000V2
18× Color (HDXA)
18× WDR/TDN (HDXJ)
26× WDR/TDN (HDXF)
35× WDR/FNR (HDXG)