ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Document 800-05662V1 Rev A 43
04/11
Setting the Picture Brightness
You can adjust the brightness of the image.
To set the picture brightness:
1. Select 5 Camera Options
3 Video Setup 1 Exposure Level.
2. Select a value between 0 and 255 where:
•0 = darkest
•255 = brightest
•70 = default
Note Setting the exposure level to a value other than 70 may upset auto
white balance (AWB) operation and auto exposure (AE) operation.
Setting the Maximum AGC Level
Automatic gain control (AGC) adjusts the video signal strength to compensate
for changes in light levels.
To set the maximum AGC level:
1. Select 5 Camera Options
3 Video Setup 2 Max AGC Level 0–255.
2. Select a value between 0 and 255 where:
• 0 = picture is dim, with no noise
• 255 = picture is bright, with noise
•216 = default
To Next Page
Loading...
