Honeywell ACUIX - Special Presets; Table 3-1 Special Presets

14
Preparing to Configure the Dome
Special Presets
Special presets 72 to 99 are reserved for controlling and programming the dome.
Table 3-1 Special Presets
Preset Function Protocol
72 Recover encrypted user login Diamond, IntelliBus™, MAXPRO-mode,
VCL, VCL UTC, Pelco P, Pelco D, AD
73 Enable broadcast command receive mode
Diamond, MAXPRO-mode, VCL,
VCL UTC, Pelco P, Pelco D, AD
74 Disable broadcast command receive mode
75 Administrator/password/PIN settings:
•User login PIN
• Change PIN
•System info
• Change address, protocol
Diamond, IntelliBus™, MAXPRO-mode,
VCL, VCL UTC, Pelco P, Pelco D, AD
76 Run mimic tour 1–16
MAXPRO-mode, VCL, VCL UTC,
Pelco P, Pelco D, AD
77 Program mimic tour
78 Run preset tour 1–16
79 User default setting preset
All
80, 81, 82 Run mimic tours 1, 2, and 3 MAXPRO-mode, VCL, VCL UTC,
Pelco P, Pelco D, AD, Pelco P_AD,
Pelco D_AD
83, 84, 85 Program mimic tours 1, 2, and 3
86 End mimic tour programming mode MAXPRO-mode, VCL, VCL UTC, Pelco P,
Pelco D, AD
87, 88, 89 Start/run preset tours 1, 2 and 3 MAXPRO-mode, VCL, VCL UTC,
Pelco P, Pelco D, AD, Pelco P_AD,
Pelco D_AD
90 Setup menu (OSD) MAXPRO-mode, VCL, VCL UTC, Pelco P,
Pelco D, AD
91 Reserved
92 Toggle auto exposure on or off
MAXPRO-mode, VCL, VCL UTC, Pelco P,
Pelco D, AD
93 Toggle backlight compensation on or off
94 Toggle between day mode and night mode
a
95 Toggle between freezing and unfreezing the current scene
a
96 Run flashback function (toggle between two saved positions)
97 Advanced preset All
98 Camera reset
a
Diamond, IntelliBus, MAXPRO-mode,
VCL, VCL UTC, Pelco P, Pelco D, AD
99 Toggle between day mode and night mode
a
Diamond, IntelliBus
a
Camera model dependent