Honeywell ACUIX - Setting E-Flip and Mirror Image

ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Document 800-05662V1 Rev A 35
04/11
To set the video gain and shutter speed for high light or low light:
1. Select 5 Camera Options
4 White Balance  3 Enter High Light 28 dB
or 4 Enter Low Light 28 dB.
2. Select a Video Gain Setting:
• 0 dB, 2 dB, 4 dB, 6 dB, 8 dB, 10 dB, 12 dB, 14 dB, 16 dB, 18 dB, 20 dB,
22 dB, 24 dB, 26 dB, or 28 dB
3. Select a Shutter Speed:
• NTSC cameras (high light default is 1/60 s; low light default is 1/30 s):
1/4 s, 1/8 s, 1/15 s, 1/30 s, or 1/60 s
• PAL cameras (high light default is 1/50 s; low light default is 1/25 s):
1/3 s, 1/6 s, 1/12 s, 1/25 s, or 1/50 s
To enable/disable manual white balance:
• Select 5 Camera Options
4 White Balance  5 Manual White Balance
ON or OFF (default).
To set red gain and blue gain:
1. Set manual white balance to ON.
2. Select 5 Camera Options
4 White Balance  6 Red Gain.
3. Select a value between 0 and 255 (default = 200).
4. Select 5 Camera Options
4 White Balance  7 Blue Gain.
5. Select a value between 0 and 255 (default = 200).
Setting E-Flip and Mirror Image
This feature is only available with HDXJ and HDXF cameras. It is not available with
HDXA cameras.
E-Flip turns the image upside down. Mirror Image reverses the image
horizontally.
To enable/disable E-Flip:
• Select 5 Camera Options
 5 Video Options  2 E-Flip  ON or OFF
(default).
To enable/disable Mirror Image:
• Select 5 Camera Options
 5 Video Options  3 Mirror Image  ON or
OFF (default)