Honeywell ACUIX - Navigating OSD Menus; Sending the Dome to a Preset

ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Document 800-05662V1 Rev A 13
04/11
Navigating OSD Menus
You can navigate through the menu options displayed on the monitor using the
following controller commands:
• To navigate vertically through the menu options, move the controller joystick
up or down.
• To select a menu option, or to toggle between settings, press Iris Open (Iris+).
• To exit a menu and return to the previous screen, press Iris Close (Iris
−) .
Sending the Dome to a Preset
A preset is a memorized dome function that can be recalled manually by the
operator.
• To go to a preset using the UltraKey Touch controller, press View, type preset
number
, and then press Enter.
• To go to a preset using the HJZTP controller, type
preset number , and then
press Preset.