Honeywell ACUIX - 6 Configuring HDXA, HDXJ, and HDXF Camera Settings; Setting the Zoom

Document 800-05662V1 Rev A 29
04/11
6
Configuring HDXA, HDXJ, and HDXF
Camera Settings
This chapter contains the following sections:
• Setting the Zoom, page 29
• Setting Exposure, page 31
• Setting NightShot (True Day/Night), page 32
• Setting White Balance, page 34
• Setting E-Flip and Mirror Image, page 35
• Setting the Vertical Phase Edge, page 36
• Setting Wide Dynamic Range, page 36
• Setting Motion Detection, page 37
• Setting the Video Gain and Lift (UTP Video Output), page 38
Setting the Zoom
Setting the Maximum Digital Zoom
Digital zoom enlarges an image by expanding it both vertically and horizontally,
resulting in an overall reduction in resolution. You can limit the amount of digital
zoom available to the camera.
To set the maximum digital zoom:
• Select 5 Camera Options
 1 Zoom and Focus  1 Max Digital Zoom
Mag
 1× (default), 12×, 4×, or 2×.