Honeywell ACUIX - Table 7-10 CX Code Last Hexadecimal Digit

104
On-Screen Setup Menus
Note If the ACUIX receives a 00 corrupted memory error code, the ACUIX
automatically clears the memory and resets all default settings. All user
programming (Presets, Preset Tours, Mimic Tours, Sector IDs, and Privacy
Zones) is deleted.
In the Cx code, the last hexadecimal digit is made up as follows:
Therefore, this error code can represent multiple errors.
The EE error code includes the following byte (2 digit) hexadecimal number where the
right hand digit is represented as in the above table and the left hand digit is represented
as in the above table with bit 0 = bit 4, bit 1 = bit 5, bit 2 = bit 6, and bit 3 = bit 7.
Table 7-10 Cx Code Last Hexadecimal Digit
bit#
3210Hexadecimal Digit
00000
00011
00102
00113
01004
01015
01106
01117
10008
10019
1010A
1011B
1100C
1101D
1110E
1111F