ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 65
02/08
The Presets reserved for ACUIX setup, programming, and control functions cannot be
programmed and cannot be included in Preset Tours.
Table 4-2 Pre-programmed Presets ACUIX (VCL)
Preset Function
Preset 72 Recover encrypted PINs
Preset 75 Administrator Login screen
Preset 76 Run Mimic Tour 1–16
Preset 77 Program Mimic Tour
Preset 78 Run Preset Tour 1–16
Preset 80 Run Mimic Tour 1
Preset 81 Run Mimic Tour 2
Preset 82 Run Mimic Tour 3
Preset 83 Program Mimic Tour 1
Preset 84 Program Mimic Tour 2
Preset 85 Program Mimic Tour 3
Preset 86 Terminate Mimic Tour programming
Preset 87 Start Preset Tour 1
Preset 88 Start Preset Tour 2
Preset 89 Start Preset Tour 3
Preset 90 Setup Menu (on-screen displays)
Preset 91 Toggles the error table display
Preset 92 Toggles auto exposure ON and OFF (factory default is ON).
Preset 93 Toggles backlight compensation ON and OFF. The unit must be
in auto exposure mode for backlight compensation to function.
Preset 94 Toggles between standard operation and NightShot mode
(camera models 843216-1011, 843216-1013, 843216-0984, and
843216-0985 only).
Preset 95 Toggles between freezing and unfreezing the video
Preset 96 Executes the Flashback function
Preset 97 Reserved
Preset 98 Camera Reset
Preset 99 Reserved
To Next Page
Loading...
