Honeywell ACUIX - Table 7-13 Auto Exposure Control Mode Settings

ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 111
02/08
Exposure Control
Select 2 from the Camera Options menu to
setup the lens Exposure Control options.
1. Select 1 to change the Auto Exposure
Mode. This setting applies when the
controller and the camera lens are in
auto iris mode. If the controller is set
to manual iris, the auto iris mode is
disabled, and the lens iris is in manual
mode. Selecting 1 toggles between
the available modes of operation. The
settings for each mode are displayed
below the menu options. The default
Auto Exposure Mode is AE. The following modes and settings are available:
EXPOSURE CONTROL
1 Auto AE Mode ........... AE
2 Manual AE Mode ....... Iris
AE Exposure Mode Features
NightShot Control ....... MAN
Auto NS Sensitivity ...... NA
Digital Slow Shutter .... OFF
ESC to Exit
Table 7-13 Auto Exposure Control Mode Settings
Auto AE Mode Settings
NightShot Control MAN
Auto NightShot Sensitivity NA
Digital Slow Shutter OFF
Auto AER1 Mode Settings
NightShot Control AUTO
Auto NightShot Sensitivity HIGH
Digital Slow Shutter OFF
Auto AER2 Mode Settings
NightShot Control AUTO
Auto NightShot Sensitivity MID
Digital Slow Shutter OFF
Auto AE+ Mode Settings
NightShot Control MAN
Auto NightShot Sensitivity NA
Digital Slow Shutter AUTO
Auto AER+1 Mode Settings
NightShot Control AUTO
Auto NightShot Sensitivity HIGH
Digital Slow Shutter AUTO
Auto AER-5 Mode Settings
NightShot Control AUTO
Auto NightShot Sensitivity MID